Goertz Micro Purl Copper Cu RCA interconnects 0.5 Meter

Description

Goertz Micro Purl Copper Cu RCA interconnects. Condition is "New".
Details
Unique Flat Design
Alpha-Core interconnects consist of two or three flat, solid conductors sandwiched on either side of a microscopically thin dielectric. The result, a signal cable with an extremely low inductance and unprecedented clarity of the treble and high midrange. The conductors are bands of solid fine silver or high purity OFC copper. They are finished with transparent jackets of high grade polymer and fitted with Teflon insulated black chrome RCA or XLR balanced connectors with rhodium or gold plated contacts.
The low inductance, an effect of the Bridgeport Magnetics’ patented geometry, eliminates radiated fields while at the same time rejecting extraneous fields. This means that our interconnect cables can be bundled with other signal and power cables without any risk of cross talk or line frequency hum. Extensive tests have established that they are impervious to broadcast bands and other EMI and RF fields, and thus provide a virtually undisturbed signal path between source components and pre-amplifiers, and between pre-amplifiers and power amplifiers.
Matched Impedance Reduces Ringing
Another reason for the unprecedented clarity reached with the Bridgeport Magnetics interconnects is the absence of signal reflections and ringing, attained through a near match of cable impedance with the impedance encountered at the signal source. Because in most cases the output impedance at the source differs vastly from the input impedance at the load side, a match at both ends is impossible. But, as demonstrated with the Goertz MI speaker cables, a single sided near match is sufficient to effectively prevent mismatch signal reflections from traveling back and forth through the signal cables and eventually entering the amplifier feedback loops.
‘Micro Purl’, Copper or Silver
The revolutionary Micro Purl is cutting-edge transmission line technology. It contains two 50 microns thick by 2mm wide signal carriers made of solid fine silver or OFC Copper, placed on each side of a copper ground plane. The ultra thin three layer sandwich is then twisted (purled) as it is embedded in a heavy sheath of transparent high grade polymer. The twisting facilitates handling and further enhances EM and RF rejection. Micro Purl is breaking new ground as professional quality microphone and patch cables, and as digital interconnects.