Optical Coaxial Toslink Digital to Analog Audio Converter Adapter RCA 3.5mm L/R

Description

Cooligg Optical Coaxial Digital to Analog Audio Converter Adapter RCA L/R 3.5mm
This Digital to Analog Audio Converter is designed for either home or professional audio switching.
It converts Coaxial or Tosllnk digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks.
This Converter is small in size and quite easy to install .
FEATURES:
This Converter has many features that enable it to perform in a superior manner Among those features you will find
*Converts Coaxial or Toslink digital audio signals to analog L/R audio
*Supports sampling rate at 32,441. 48 and 96 KHZ.
*24bit S/PDIF incoming bit stream on left and right channels
* Provides electromagnetic-noise-free transmission
*Easy to install and simple to operate.
SPECIFICATIONS:
Signal Input/Output
Input Audio
Coaxial or loslink digital audio
Output Audio
L/R audio
Connector
Input audio connector
Toslink,1X RAC (Coaxial)
Output audio connector
2XRCA(R/L)
Sampling rate
32,44,148 and 96KHz
Mechanical
Size (L-W-H)
51x41x26mm
Weight(Net)
78g
Warranty
Limited Warranty
1 year parts and labor
Environmental
Operating Temperature
0
℃
to +70
℃
Operating Humidity
10%
同
85% RH(no condensation)
Storage Temperature
-10
℃
to +85
℃
Storage Humidity
5%
同
90% RH (no condensation)
Power Requirement
External Power Supply
5V DC@2A
Power Consumption
0.5watts(max)
Regulatory Approvals
Converter Unit
Fcc.CE UL
Power Supply
UL.CE.FCC
Accessories Adapter
AC Power Adapter
US standard. UK standard and so on
User Manual
English Version
Note:
Specifications are subject to change with out notice
PACKAGE CONTENTS:
1 x digital to analog audio converter
1 x Toslink cable (Optical cable)
1 x USB power cable
1 x User manual
PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the signal input(s), output(s) and power requirements.
CONNECTION AND OPERATION
Before Installation, please make sure all devices you wish to connect have been turned off.
1) Connect the audio source device to the Converter using appropriate or Coaxial cables
2)
Connect the A/V Receivers or Amplifiers to the Converter using appropriate R/L Cable.
3) Insert the DC side of 5v power supply into the converter and then connect the AC side of the power supply into the wall outlet.
Note:
1. pls remove the plastic cap from the optical connectors
before using it .
2. must connect a 5V power adapter
3. and select S/PDIF output
Attention:
Insert /Extract cable gently.