SME 3009 Turntable Tonearm Silicone Oil/Damping Fluid 200000 cSt for Damper Kit

Description

ALSO SEE OTHER Thorens, Quad and DUAL SPARES IN MY ITEMS FOR SALE OR VISIT MY STORE!
Please note: the old dirty and dried up fluid must be
removed before a fresh charge of Silicone Oil can be applied! The tank can only hold a maximum of 2ml, so clean both the paddle and tank first. The relevant parts of the manual have been reproduced in the photos to serve as an aid and to buyers. According to various remarks on audio forums, best results are obtained by using less than the recommended 2ml, so inject 1.5ml and start testing until a satisfactory balance has been achieved!
Approximately 2ml in syringe. As per manual, 200k or 200000 cSt silicone oil to be used for smooth tonearm movement and improvement in performance. After years of use the original fluid has dried up or dust and dirt are causing the fluid to become more frictional. Cleaning and applying fresh fluid is advisable to see if the problem can be resolved. For comparisons sake, 200k cSt has more or less the consistency of honey and 1 cSt is the viscosity of water and the analogy here is like dropping a spoon in a glass of water or a pot of honey.....the spoon takes a long time to sink to the bottom in honey! Unless you are a repair shop, all you need are 2ml and not the whole big bottle. Therefore, I am selling off my surplus stock in an easy to apply syringe (a needle is not required nor convenient ) and small quantities that an enthusiast would need! For the Low Viscosity 60K, 100K, 300K (for a more slower drop or certain models of DUAL turntables)  and 500K  as well as 1M (for heavy tonearms)  Silicone Oil, please look at my other similar items for sale!
Free shipping is included in the price!
Returns not accepted!!
Also checkout my other items on sale as they are just as interesting and save by combining shipping where applicable.
New lots every weekend.