Van Helsing -Hammer Horror 1/7 Scale Resin Model kit

Description

From the Hammer Horror Movies Comes An Excellent rendition of Van Helsing portrayed by a very young Peter Cushing from the movie Horror OF Dracula.
The artist Put a lot of detail in the model and the face of Cushing is spot on,
The model has a dynamic pose to it.
The print came out fantastic and the key parts fir great.
The model was printed using a 4K resin printer  to bring all the details to life with a hard resin printed at 2 mm thickness
Any fan of the Horror Genre or of the Hammer movies will enjoy having this part of their collection.
** Base is not included but a name plate is**
Disclaimer
:
This is a 3D resin print. It will have like all materials in making models slight imperfections. These imperfections does not mar the model in anyway and with the knowledge of modeling can be worked out of the kit.
A big percentage of the models are hollowed out, that are what the drain holes are for and some pieces can be solid also. The drain holes can be puttied in and sanded to match.
The models are printed no less than 2mm walls so they are thick
All models go thru a post-production process with sanding and using fillers for any defect that can be found, sometimes they can get over looked. I try to put in your hands a model that is ready to prime and paint.
Color of resin and filament may vary
Anytime you want a tighter fit, the resin part can be heated up with hot water or a hair dryer and it will make it easier to take a better shape. Just don’t overdo it.
Working with FDM
Filament is a plastic substance that prints in lines and build up the 3D print. In order to fill some of the visible lines, a filler needs to be used, like wood filler or any Substitute primed and Sanded. I have heard that Badger makes a 2 part primer that works very well and from Smooth On a product called XTC which is an epoxie overlay.
If you are not comfortable going through these steps, maybe this model is not for you.